centrifugal separator  

Vertical Centrifugal Separators

centrifugal separator | vertical centrifugal separator | gas liquid separator

Vertical Centrifugal Separators are used for removal of either liquids or solids from a vapor stream when high liquid loading is present, some liquid storage is needed, or your configuration may need variable locations for inlet and outlets. Like our In-Line Centrifugal separators we will use either our patented “Whirl-A-Way” internal or our proprietary designed Centrifugal Can or Chevrons. Some of our models are listed here with further descriptions.

RLH; WLDV; WLD; WLUR; CC; CN; DRLH

Material: Any metal that can be formed and welded
Guarantee: 99.9% of all particles 3-8 microns and larger.

RLH | Click to View Outline:
Use: Vertical In-line for removal of liquids or solids from a vapor stream.
Operating Range: 35% to 115%
Features:

  1. Storage capacity as required can be furnished in the lower shell section.
  2. Unit can handle liquid loadings up to 400%.
  3. Inlet can be located in the side or top.

Precaution:
If solids are present, unit must have sufficient amount of liquid to flush the solids out to drain. Special precaution must be made to guarantee a proper seal leg for the drain pipe.
Internal Type: “Whirl-A-Way” Centrifugal

WLDV | Click to View Outline
Use: Vertical downflow for removal of liquids or solids loadings should not exceed 10%.
Operating Range: 35% to 115%
Features:
Storage capacity as required can be furnished in the lower shell section. Liquids or solids loadings should not exceed 10%.
Precaution:
Solids must be non-adhesive and non-clinging. If this is present a special pre-installed cleaning apparatus is required.
Internal Type: “Whirl-A-Way” Centrifugal

WLD | Click to View Outline
Use: Vertical downflow for removal of liquids and solids from a vapor stream.
Operating Range: 35% to 115%
Features:
Storage capacity as required can be furnished in the lower shell section. Can handle liquid loadings up to 10%.
Precaution:
If solids are present, unit must have sufficient amount of liquids to flush the solids out to drain.
Internal Type: “Whirl-A-Way” Centrifugal

WLUR | Click to View Outline
Use: Vertical Upflow for removal of liquids and solids from any vapor stream where storage capacity is required
Operating Range: 35% to 115%
Features:
Capable of handling liquid loadings up to 600%. Storage as required can be furnished in the lower shell section.
Precaution:
If solids are present, it is not recommended unless wash out connections are installed. A special precaution must be made to guarantee a proper seal leg for the drain pipe.
Internal Type: “Whirl-A-Way” Centrifugal

DRLH | Click to View Outline
Use: Vertical downflow for removal of liquids or solids from any vapor stream.
Operating Range: 0% - 125%
Features:
Capable of producing gas that does not exceed 5mg/Nm3 as PM10
Meets European Emission Standards
Will remove 99.9 of all particles 5-8 microns and larger
Options:

  1. Integral Silencer can be furnished
  2. Wear Plates can be furnished
  3. Wash system for cleaning upper section or scrubbing incoming gas
  4. Wash system for washing storage areas.

Precaution:
Solids must be non-adhesive and non-clinging. If this is present a special pre-installed cleaning apparatus is required.

CC | Click to View Outline
Use: Vertical Upflow for removal of liquids and solids from any vapor stream where large amounts of liquid are present and good to very good steam is needed.
Operating Range: 0% to 130%
Features:

  1. This unit is capable of handling liquid loadings of 500:1 liquid/gas ratio. Storage capacity as required can be furnished.
  2. Excellent efficiency
  3. Handles pulsing or surging conditions easily
  4. Excellent turndown ratio
  5. High liquid loading capabilities
  6. Low maintenance (no replaceable cartridges required)

Internal Type: Dyna-Therm Centrifugal Can and Chevrons

CN | Click to View Outline
Use: Vertical upflow for removal of liquids in a vapor stream
Operating Range: 0% to 130%
Features:
This unit is capable of handling liquid loadings up to 500:1 liquid to gas ratio. Storage capacity as required.
Precaution:
Not recommended if solids only are present.
Internal Type: Dyna-Therm Centrifugal Can

Copyright © 2009 Dyna-Therm Corporation. All Rights Reserved. an Orange Sparrow Design by PetroPages.com